Moderated Discussion Areas
  ContinuousWave: Small Boat Electrical
  KING StarBoard and Adhesives

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   KING StarBoard and Adhesives
jimh posted 03-28-2015 09:06 AM ET (US)   Profile for jimh   Send Email to jimh  
The KING Plastics company has recommendations for using adhesives with their KING StarBoard products. See

The executive summary: adhesives don't work with KING StarBoard.

Use of KING StarBoard or similar materials, which I believe are in the category of ultra-high molecular weight (UHMW) plastics, as an intermediate mounting surface for installing screw fasteners to hold SONAR transducers on the transom of a boats is often mentioned or recommended. After reading the recommended procedures for using adhesives with KING StarBoard, I believe the best method of bonding KING StarBoard to a boat transom is probably to use mechanical fasteners.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.