Moderated Discussion Areas
  ContinuousWave: Post-Classic Whalers
  Mills Bimini and Bow Trolling Motor

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Mills Bimini and Bow Trolling Motor
LCnSac posted 11-11-2005 01:01 AM ET (US)   Profile for LCnSac   Send Email to LCnSac  
Down to some details on ordering and rigging my '06 Montauk. Is there a known conflict with the Mills Bimini and a bow mounted trolling motor (MK with quick release)? If you fold the bimini forward will it clear the trolling motor? Thanks.


Whalerider posted 11-12-2005 08:01 AM ET (US)     Profile for Whalerider  Send Email to Whalerider     
The only way I see of avoiding that problem is to have one that folds back. Check out the pics on Mills site and you can see that there is just no way to have a bow motor and a forward folding top, unless you leave it up and stored in the boot. I would think that Mills could fix you up with an aft folding top, that would seem to be a common request.


Marsh posted 11-14-2005 06:07 PM ET (US)     Profile for Marsh  Send Email to Marsh     
You could probably fold your top forward, but only if done when the troller was deployed. That's what I found on my 2004 Montauk. Hence, I fold my bimini toward the stern, and secure it to the side rails with small dog collars having quick disconnects.



Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.