CONTINUOUSWAVE

I just bought a 1988 Revenge 22 W-T.

Q1: do I put a plug in the back of [a 1988 REVENGE 22 W-T]?

It doesn't seem like [a 1988 REVENGE 22 W-T] takes a plug. There's a scupper in a hold.

Q2: does the hold always have water in it unless you're up on plane?

Q3: how well does the [REVENGE 22 W-T] drain off rain?

ASIDE: I'm excited about this REVENGE 22 W-T as I've always liked a cathedral-hull boat. I've loved Dick Cole's Airslot and Thunderbird hull designs, and I like the design of this Revenge.

The REVENGE hull is based on the OUTRAGE hull, and it was designed by Bob Dougherty, as an evolution from the original DIck Fisher designed OUTRAGE 21 hull.

For advice about drains see the owner's manual. You probably don't have a copy, so use my HTML version:

https://continuouswave.com/whaler/refer ... nual18-25/

For self-bailing and drains, read at

https://continuouswave.com/whaler/refer ... elfBailing

For more about your 22-foot hull, see

https://continuouswave.com/whaler/reference/22Outrage/

For the history of the development of the Boston Whaler hull which began with the original 13-foot design, read my article at

https://continuouswave.com/whaler/refer ... esign.html

I recommend you read the Frequently Asked Questions article in the REFERENCE section. See

https://continuouswave.com/whaler/reference/FAQ/