Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Bimini Top Photo for Whaler 22

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Bimini Top Photo for Whaler 22
dawson981 posted 04-20-2015 10:14 AM ET (US)   Profile for dawson981   Send Email to dawson981  
I recently took off my T-Top and plan on replacing it with a Bimini top. I want the top to extend to the bow area when folded so it won't just drop on the deck and get in the way. If anyone has photos of a Bimini both folded and unfolded that would be great.
crabby posted 04-20-2015 03:11 PM ET (US)     Profile for crabby  Send Email to crabby     
I'd also like to see some images of mounting not just the bimini for a 22 outrage but also the bow dodger. I've got the basics (frames, windshield and canvas from a Mills setup) but no mounting hardware or old mounting holes to help me (boat was formerly a 22 cuddy).
Freddy posted 04-20-2015 03:46 PM ET (US)     Profile for Freddy  Send Email to Freddy     
Page down twice.
http://continuouswave.com/ubb/Forum3/HTML/017402.html

Near the bottom of this link, plus a picture of a Sun top on a 25'Outrage.

http://continuouswave.com/whaler/cetacea/cetaceaPage08.html

Is your 22' Whaler a Cuddy?
http://continuouswave.com/whaler/cetacea/cetaceaPage48.html

http://continuouswave.com/whaler/rendezvous/NC2000/images/memory512x316. jpeg

http://smg.photobucket.com/user/Widenerless/media/ba53563c.jpg. html?sort=3&o=1#/user/Widenerless/media/ba53563c.jpg.html?sort=3&o=1& _suid=142955893931204535338520331073

crabby posted 04-22-2015 08:29 PM ET (US)     Profile for crabby  Send Email to crabby     
@Freddy: Thanks.

Gambler has the canvas setup I have not yet installed but those images don't show mounting details.

My boat is a 22 outrage formerly a cuddy. I removed the cuddy shell and built hatches over the wells to open up the bow to allow greater access for my dog and myself when I run the boat up on the marshes. I have a stock Mills canvas setup for a 22 outrage I would like to install and would like to see some details of the stock slides (that did not come with the canvas I bought second hand) and mounting positions.

No matter, I will eventually figure this one out (if I don't build a pilothouse first)!

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.