The [forward cockpit] deck step that remained made for a convenient storage area.
- Fig. 1. View of the foredeck of the OUTRAGE 25 converted from a CUDDY model.
- Fig1.jpg (89.59 KiB) Viewed 1036 times
- Fig. 2. View of the OUTRAGE 25 converted from CUDDY model.
- Fig2.jpg (88.87 KiB) Viewed 1036 times
- Fig. 3. View of the OUTRAGE 25 converted from a CUDDY model.
- Fig3.jpg (93.61 KiB) Viewed 1036 times
With the boat’s “innocence” now out of the way, I am taking advantage of a planned fuel tank replacement by re-imagining the boat with the following changes.
- [the engine remote controls will be electronic];
- an engine bracket will be added;
- the batteries will move back to the stern from the console;
- a secondary power distribution bus will be added to the console; and,
- I may modify the aft splash well by creating a waist-high live well.
Any other suggestions--other than "just buy the boat you wanted--will be welcome.
ASIDE. I hope my remarks might help someone [thinking about converting an OUTRAGE CUDDY into just an OUTRAGE].
[Moderator's note: the images seen above have been modified by being rotated so that the camera is being held either vertically or horizontally. In the initial images the camera was being held at "a Dutch angle." Also, this new topic was separated from a previous thread on the possibilities involved in conversion to OUTRAGE from OUTRAGE CUDDY. ]
